HBCT4500-9 hydraulic knuckle boom truck mounted crane 92 ton from factory

Chassis
Crane
Advantages

Chassis technical parameters

1. Truck brand: Zhongqi (other truck brand can be customized)

2. Cabin Driving type: Left hand drive (Right hand drive type can be customized)

3. Color: Red,color is optional

4. Vehicle Main Dimensions Overall size (L x W x H): 12000*2550*3800/3950mm

5. Wheel base: 1950+3625+1375+1350mm

6. Cargo Body: 8200/8400*2450*550/600mm

7. Weight in KGS:53000 kg

8. Tare weight: 52870,52805 kg

9. Front axle loading capacity: VPD95D

10. Rear axles loading capacity: MAT16ZG

11. Engine type: Weicai, WP7H270E68 (displacement 6800ml)

12. Horsepower: MC11.46-61,460HP

13. Max Torque: 2200N.m

14. Emission standards: National Third Standard, National five Standard, National six Standard are optional.

15. Max Speed: 89 km/hour

16. Gearbox: HW25712XSCJ(12 level）

17. Tire: 12.00R20, an additional spare tire will be provided.

18. Crane: 50 Ton, 80 Ton, 100 Ton knuckle boom crane can been chosen.

1. Product technical parameters

Model	H4500
Max Lifting moment（kN.m）	4500
Max Lifting Capacity (kg)	92000
Chassis	ZZ5537V31BHE1
Motor	MC11.44-50(440 Horsepower)
Boom Extension Sections	6/8
Hydraulic amplitude of the basic model (m)	18.4 (-6)
Max working range (m)	23.8
Max Lifting Height (m)	27.1
Max lifting angle (°)	1~75
Slewing angle (°)	360
Slewing speed(r/min)	0.9~1.2
Slewing torque (kN.m)	127.4
Max lateral outrigger span (m)	7.95
Max longitudinal outrigger span (m)	7.9
Rated working pressure (MPa)	30
Rated Flow Rate(L/min)	108
Total weight with chassis (t)	53

2. Lifting performance graph

微信图片_20231228154727.png

3. Lifting capacity parameters

4. Product configuration

(1) The standard configuration is a six-section hydraulic telescopic boom, and the working range of the hydraulic telescopic boom is 18.4m;

Optional configuration is eight sections of hydraulic telescopic boom, hydraulic telescopic boom working range of 23 .8m, equipped with bearings 22t lifting capacity hook.

(2) The standard configuration is imported high-torque slewing reducer, and the slewing torque is 127.4kN.m.

(3) The standard configuration is six horizontal/vertical telescopic legs, with a maximum transverse leg span of 7.95m and a maximum longitudinal leg span of 7.9m.

(4) Counterweight system: the whole machine is reserved with the expansion interface of the counterweight system, and the detachable counterweight bracket with 1m telescopic can be selected, and the 10T basic counterweight or a total of 20T upgraded counterweight can be selected;

(5) Hydraulic system: standard high-pressure constant flow hydraulic system, standard control valve for constant flow oil pump, load holding valve and telescopic cylinder balance valve, high expansion speed obtained by using the oil return system and the increase of oil circuit in the cylinder;

(6) A 600L hydraulic oil tank is standard.

(7) Lighting system: standard all-round lighting system, 4 LED array high-brightness lights for the boom, 4 LED array high-brightness lights for the frame, 2 LED flash warning lights for the turntable, 6 LED warning strips for the legs, and IP65 waterproof grade for the electrical system.

(8) Control system: standard turntable side high swivel seat, with horizontal telescopic function; Standard body on both sides of the leg manual control operating system; It is equipped with a basic electronic control system as standard, including basic torque protection system, lighting system control, emergency stop function, radiator and oil filter alarm, etc.

On the basic electronic control system, it can be additionally equipped with a domestic/imported remote control system, including remote control of quadruple crane action, engine throttle control, and emergency stop function. It can be equipped with winch remote control operation, and a UMC proportional control valve and remote-control system are added. It can be equipped with an intelligent centralized lubrication system to fill grease to the lubrication point regularly and quantitatively.

On the remote-control operating system, the operation safety control system can be optionally equipped, including full torque limiting function and anti-tipping control function.

On the basis of the above, it can also be upgraded to an intelligent electronic control system: equipped with a programmable controller for getting on and off the car, equipped with an 8-inch color display, and synchronously displaying the attitude and operating parameters of the crane. Equipped with a multi-function remote control and a 4-inch color display, it can synchronously display the attitude and operating parameters of the crane. Full remote-control, including crane action, outrigger action, counterweight action. Intelligent electronically controlled overload protection, equipped with emergency stop function. Intelligent vehicle stability control system, tipping early warning protection and restriction function;

(9) Full envelope exterior structure and skirt structure as standard (including 2 reinforced toolboxes, 6 regular locking and spring toolboxes).

(10) A high-pressure filter is supplied as standard.

(11) Large-sized levels are standard on both sides of the frame.

(12) An 80T lifting capacity hook fitted with bearings is standard.

(13) Standard vehicle painting, rich red color matching and labeling. Support personalized customization of unique color matching and labeling, as well as corporate LOGO and brand labeling.

(14) Optional high-power intelligent temperature control oil cooler.

(15) Optional 5T domestic/imported winch, adding a control valve, wire rope, single-rate hook, pulley and other accessories and control system.

(16) Optional 6 pieces of 600*600mm polymer synthetic material outrigger pads.

HBCT4500-9 hydraulic knuckle boom truck mounted crane 92 ton from factory

Details

相关推荐